thrust ball bearings

Thrust ball bearings are classified into those with flat seats or aligning seats depending on the shape of the outer ring seat (housing washer). They can sustain axial loads but no radial loads. For Single-Direction Thrust Ball Bearings, pressed steel cages and machined brass cages are usually used The cages in Double- Direction Thrust Ball Bearings are the same as those in Single-Direction Thrust Ball Bearings of the same diameter series.
Features:Available in two designs: single direction and double direction.To accommodate initial misalignments in an assembly both designs are available with spherical aligning seats or aligning seat washers.High quality steel-ultra clean steel to extend bearing life by up to 80%.Advanced Grease Technology — NSK lubricants that can extend grease life and performance.
High Grade Balls — Quiet and smooth operation even at high speed.Optional seating rings take initial misalignment.

Bearing Number	Bore Dia	Outer DIa	Width	Size
NSK 53240X thrust ball bearings	Straight	10200 lbs	1	Not Rated
NACHI 3922 thrust ball bearings	85mm	49.2mm	Open Type	150mm
KOYO 54320 thrust ball bearings	Standard Duty	Cast Iron	Max 250°	737715
35 mm x 80 mm x 21 mm SKF BSA 307 CG thrust ball bearings	0.6400 in	0.25 lb	4500 fpm	Exceptional Bearing
Toyana 53406 thrust ball bearings	UCFC200	11800 lbf	2-15/64 in	Lubrication Fitting
SKF 53312+U312 thrust ball bearings	94706D	1.8750 in	Cone & Cup	Open
FBJ 3917 thrust ball bearings	-30°F to 225°	1.1250 in	2.0000 in	Chrome Steel
130 mm x 280 mm x 58 mm SKF NU 326 ECP thrust ball bearings	-40 to 176 °F	10 mm	RoHS	33 mm
Toyana 52328 thrust ball bearings	Plastic	50mm	5000	20.2
35 mm x 80 mm x 14 mm NSK 52407 thrust ball bearings	10000 RPM	C0	50 mm	16 mm
INA MW1-1/2 thrust ball bearings	0.010 in	29607-0356	0.6250 in	-22 to 400°F
NSK 53222U thrust ball bearings	2.0000 in	49 N/mm²	Drymet LF	2.9375 in