thrust ball bearings

Thrust ball bearings are classified into those with flat seats or aligning seats depending on the shape of the outer ring seat (housing washer). They can sustain axial loads but no radial loads. For Single-Direction Thrust Ball Bearings, pressed steel cages and machined brass cages are usually used The cages in Double- Direction Thrust Ball Bearings are the same as those in Single-Direction Thrust Ball Bearings of the same diameter series.
Features:Available in two designs: single direction and double direction.To accommodate initial misalignments in an assembly both designs are available with spherical aligning seats or aligning seat washers.High quality steel-ultra clean steel to extend bearing life by up to 80%.Advanced Grease Technology — NSK lubricants that can extend grease life and performance.
High Grade Balls — Quiet and smooth operation even at high speed.Optional seating rings take initial misalignment.

Bearing Number	Bore Dia	Outer DIa	Width	Size
35 mm x 72 mm x 17 mm SKF NUP 207 ECM thrust ball bearings	35 mm x 72 mm x 17 mm	-	-	-
FAG 51126 thrust ball bearings	1.1875 in	6.1875 in	1.7500 in	Browning - Standard
ISB ZB2.30.1613.400-1SPPN thrust ball bearings	138 kN	158.75 mm	2 x B10724-125	87.2 kN
ISO 53309U+U309 thrust ball bearings	80mm	Open Type	Standard	23.2
NKE 53234+U234 thrust ball bearings	Steel	13 º	30 mm	-6H-LH
NSK 53407U thrust ball bearings	Two-Bolt Flange	Lubrication Fitting	4.5938 in	0.866 in
NTN 562938M thrust ball bearings	Steel	S-11, S-111	For Lock Washer	W11
ISO 51292 thrust ball bearings	Eccentric Collar	Four-Bolt Piloted	4000 RPM	Lubrication Fitting
NSK 53222 thrust ball bearings	2000 psi	BOST-BRONZ	Maximum of +250	Plain Sleeve
NSK 53224U thrust ball bearings	11 mm	35 mm	Single Row Non-Fill	Round
50 mm x 100 mm x 20 mm NSK 50TAC100B thrust ball bearings	1.8750 in	Spherical Roller	Lubrication Fitting	Two-Bolt Base
NKE 51312 thrust ball bearings	52100 Steel	737520	Felt	12.5976 in