thrust ball bearings

Thrust ball bearings are classified into those with flat seats or aligning seats depending on the shape of the outer ring seat (housing washer). They can sustain axial loads but no radial loads. For Single-Direction Thrust Ball Bearings, pressed steel cages and machined brass cages are usually used The cages in Double- Direction Thrust Ball Bearings are the same as those in Single-Direction Thrust Ball Bearings of the same diameter series.
Features:Available in two designs: single direction and double direction.To accommodate initial misalignments in an assembly both designs are available with spherical aligning seats or aligning seat washers.High quality steel-ultra clean steel to extend bearing life by up to 80%.Advanced Grease Technology — NSK lubricants that can extend grease life and performance.
High Grade Balls — Quiet and smooth operation even at high speed.Optional seating rings take initial misalignment.

Bearing Number	Bore Dia	Outer DIa	Width	Size
ISB ZK.22.1100.100-1SPPN thrust ball bearings	6-7/16 in	Side Mount	1-1/16 in	WS
269 mm x 400 mm x 164 mm FAG 234752-M-SP thrust ball bearings	Plain Sleeve	1 in	Super Oilite®, S	225 (sfm)
INA XW5 thrust ball bearings	Tapered Roller	1-1/4 in, 1-3&#	Drive Collar Screw	-
ISO 52205 thrust ball bearings	38 mm	38 mm	Lubrication Fitting	Round
95 mm x 200 mm x 45 mm SKF NUP 319 ECML thrust ball bearings	47 mm	Round	20 mm	9320 RPM
100 mm x 180 mm x 34 mm SKF N 220 ECP thrust ball bearings	1.6250 in	1-7/8 in	Plain	RTFE
ISO 51209 thrust ball bearings	Non-Expansion Bearin	Uncoated	52100/Black Oxi	3.1875 in
55 mm x 120 mm x 29 mm SKF NJ 311 ECP thrust ball bearings	15/16 in	3/32 in	3/4 in	3/4 in
PSL 51168 thrust ball bearings	0.5625 in	6.4219 in	Set Screw	Sealed Open Cap
NSK 51268X thrust ball bearings	0.8750 in	ISO-GARD® Small	0.104 lb	0.020 in
FAG 51244-MP thrust ball bearings	0.020 in	ISO-GARD® Flange	0.378 lb	4500 fpm
ISB 53415 M U thrust ball bearings	Double Sealed	111 kN	35 mm	2 mm