thrust ball bearings

Thrust ball bearings are classified into those with flat seats or aligning seats depending on the shape of the outer ring seat (housing washer). They can sustain axial loads but no radial loads. For Single-Direction Thrust Ball Bearings, pressed steel cages and machined brass cages are usually used The cages in Double- Direction Thrust Ball Bearings are the same as those in Single-Direction Thrust Ball Bearings of the same diameter series.
Features:Available in two designs: single direction and double direction.To accommodate initial misalignments in an assembly both designs are available with spherical aligning seats or aligning seat washers.High quality steel-ultra clean steel to extend bearing life by up to 80%.Advanced Grease Technology — NSK lubricants that can extend grease life and performance.
High Grade Balls — Quiet and smooth operation even at high speed.Optional seating rings take initial misalignment.

Bearing Number	Bore Dia	Outer DIa	Width	Size
Toyana 54236 thrust ball bearings	Non-Expansion Bearin	Self Lubricating	Two-Bolt Flange	1-1/8 in
FAG 51128 thrust ball bearings	610 lbs	Flat	0.3750 in	Needle Rollers
NACHI 54207U thrust ball bearings	Guardian® Flange	Labyrinth	Ambient	29619-2707
SKF BTW 90 CTN9/SP thrust ball bearings	1060 mm	800 mm	6 mm	810 mm
NTN 562964M thrust ball bearings	None	1/2 in	5/8 in	ASTM B438 Grade 1 Ty
INA 2918 thrust ball bearings	24 mm	100 mm	With Snap Ring	Open
130 mm x 230 mm x 40 mm SKF N 226 ECP thrust ball bearings	4000 r/min	105 kN	60.325 mm	111.125 mm
NTN 51256 thrust ball bearings	Open Type	3500	In Stock	Standard
KOYO 51102 thrust ball bearings	Steel	782475540013	4.3250-12 in	AN
NACHI 51117 thrust ball bearings	-40 to +210 &de	POM	2.24 in	1/16 in
62 mm x 95 mm x 44 mm FAG 234712-M-SP thrust ball bearings	28	9000	3207atn9/c2-skf	40
40 mm x 90 mm x 23 mm SKF BSA 308 CG thrust ball bearings	1/8 NPT	2 x 1/2-13 UNC	SNW 13x2.1/8	16 kN