thrust ball bearings

Thrust ball bearings are classified into those with flat seats or aligning seats depending on the shape of the outer ring seat (housing washer). They can sustain axial loads but no radial loads. For Single-Direction Thrust Ball Bearings, pressed steel cages and machined brass cages are usually used The cages in Double- Direction Thrust Ball Bearings are the same as those in Single-Direction Thrust Ball Bearings of the same diameter series.
Features:Available in two designs: single direction and double direction.To accommodate initial misalignments in an assembly both designs are available with spherical aligning seats or aligning seat washers.High quality steel-ultra clean steel to extend bearing life by up to 80%.Advanced Grease Technology — NSK lubricants that can extend grease life and performance.
High Grade Balls — Quiet and smooth operation even at high speed.Optional seating rings take initial misalignment.

Bearing Number	Bore Dia	Outer DIa	Width	Size
FAG 53204 + U204 thrust ball bearings	5220 lbf	8.1250 in	UEP200NP	2-3/8 in
RHP MT7 thrust ball bearings	Without Snap Ring	1.6250 in	Zinc Plated	0.7500 in
460 mm x 830 mm x 212 mm SKF NU 2292 MA thrust ball bearings	Non-Expansion Bearin	1-9/16 in	Set Screw	SF
SKF 51116 thrust ball bearings	2530000 lbs	1,200,000	Not Split	Straight
KOYO 52308 thrust ball bearings	2.4375 in	2.5625 in	4.3307 in	200°
65 mm x 115 mm x 10 mm NKE 54216-MP thrust ball bearings	1-5/16 in	-40 to +700 &de	Uncoated	1-3/8 in
FAG 53317 thrust ball bearings	5600 RPM	Double-Row Non-Fill	12900 lbf	10700 lbf
NTN 81128 thrust ball bearings	22 mm	0.089 kg	52 mm	0.6 mm
AST 51316 thrust ball bearings	-30 to +300 &de	5 °	Steel	0.406 in
140 mm x 250 mm x 42 mm SKF NJ 228 ECJ thrust ball bearings	-30 to +100 &de	60 mm	Open	Steel (Balls&#x